Volkswagen T-Roc Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
This is a copy of my post from another forum - thought the community here might like to know as well :) I seem to recall finding out about this product from this forum if I recall correctly.

Some may think I'm mad (and probably rightly so) but one of the small things that annoyed me with the T-Roc was the lack of any kind of lining in the door pockets, glove box etc.

I hate rattles with a passion, and the lack of anything soft to line them made things that shouldnt make any noise, rattle and tinkle etc.

I found these on China mart:

VOLKSWAGEN T-ROC TRIM PLATED COMFORT SET and FABRIC SELF ADHESIVE-LASER CUT VOLKSWAGEN T ROC TRIM PLATED COMFORT SET & FABRIC SELF ADHESIVE LASER CUT|Car Covers| - AliExpress

Some of the shaping isn't absolutely perfect - for instance the lining for the glovebox is likely just a mirror image of the left-hand drive shape so took some minor fettling - but end result is a pretty big improvement over what was there.

Here are some of my efforts below. The glovebox shows a minor wrinkle which came out when I used some gentle heat with the heat gun and some pressure. The adhesive on the door pocket felt lining is pretty tacky - I learned a lot applying the first one. The little creases that seem visible in the picture really aren't at all noticeable in person.

Took a few weeks to arrive (shipped from Turkey) - international shipping at the moment is pretty extended - but for what I wanted, well and truly worth it!
Product Automotive tire Car Automotive design Vehicle
White Car Light Vehicle Automotive tire
 

·
Registered
Joined
·
1,676 Posts
Looks pretty good! Hopefully the adhesive is strong enough not to begin peeling after a while.

Have you noticed an improvement in noise?

Honestly I don’t really notice much noise but then I don’t tend to have anything hard in the door bins or glovebox but the felt definitely looks nicer.
 
1 - 3 of 3 Posts
Top