All Volkswagen T-Roc related discussions
Post Reply
Posts: 10
Joined: Wed Sep 19, 2018 9:14 pm


Post by Rosco » Sun Jul 26, 2020 8:14 am

Hi everyone
Has anyone had problems with there hub caps. I have had one yesterday just come off although it appears the main part of the hub cap is still in place. Any advice on removal or replacement part No. would be appreciated. I have the 18 inch alloys.
Regards to all Rosco

Posts: 284
Joined: Sat Feb 01, 2020 6:11 pm

Re: Hubcaps

Post by 182_blue » Sun Jul 26, 2020 8:39 am

You can get them off if your cautious by gentle prying, BUT as you have lost the main part it might not be possible so it's either take the wheel off and pop it from inside or just screw a screw in from outside and pull it off, better still take it to VW and make them swap it FOC as it's probably still under warranty.

PS I have seen where others have lost the shiny part just leaving the black back part.
T-Roc 2.0 Tsi R 300bhp.
White with black roof.
Reverse camera.
Electric boot.
Plus all usual extras on the R.

Posts: 238
Joined: Sat Nov 10, 2018 6:26 pm

Re: Hubcaps

Post by Seal » Sun Jul 26, 2020 12:09 pm

it’s best to remove the wheel to remove the hub cap,VW has its own tool to remove without removing the wheel and without damaging
T-Roc 1.5 TSI Evo 150ps
Yellow Turmeric, Black Roof/Door Mirrors, Silver Roof rails
LED Headlights/Running Lights
RearView Camera
Park Assist
Electric Tailgate
19'' wheels "Suzuka"

User avatar
Posts: 52
Joined: Wed Apr 22, 2020 3:39 pm

Re: Hubcaps

Post by doggy » Fri Jul 31, 2020 11:13 am

The PN for the OEM caps is: 5G0601171
Or you can just replace all 4 of them for the self levelling ones (PN: 000071213C) or with the new VW logo self-levelling ones (000071213D) :-)
NL: T-Roc 2.0 TSI Sport, R-Line, Energetic Orange. De-chromed & glossy black rims
GR: VW Polo 6N (was 1050cc), 1598cc 16v, GT28BB, Lancia Delta Integralle ECU. Ferrari red paint & custom black interior
GR: Seat Ibiza 1.4 101hp the holiday car

Posts: 10
Joined: Wed Sep 19, 2018 9:14 pm

Re: Hubcaps

Post by Rosco » Sat Aug 01, 2020 8:00 am

Hi Rosco here thanks for all the replies managed to get one and fitted it by using a fine screw driver to get the old one off and a push fit for the new one. Thanks again.

Post Reply